All guides

Install before you travel

How to Install eSIM on Honor Using Quick Install (Arabic Interface)

Very Important Notice ⚠️

Please read the eSIM installation instructions carefully before starting and follow the steps in order to avoid any installation issues. You can reinstall the eSIM on the same device only; it cannot be transferred to another device.

This guide is for Honor phones set to Arabic. You'll install your eSIM by scanning the QR code from Jawroam, then enable data and roaming when you arrive. Each step shows the Arabic menu name you'll see, with the English meaning.

Note: Steps may vary slightly depending on your device and software version.


Before You Start

  • Check eSIM support: dial *#06#. If an EID number appears, your phone is ready.
  • Connect to Wi-Fi during installation.
  • Have the QR code ready on another screen or printed.
  • Have two physical SIMs? Remove one first, as the phone runs only two SIMs at a time.

Install the eSIM

1. Open Settings

Open الإعدادات (Settings) and tap شبكة الجوال (Mobile network).

2. Open SIM management

Tap إدارة بطاقتي SIM (SIM management).

3. Select SIM 2

Tap the SIM 2 card showing إضافة بطاقة eSIM (Add eSIM).

4. Choose eSIM

On إعدادات SIM ٢ (SIM 2 settings), select بطاقة eSIM (eSIM).

5. Add the eSIM

Tap إضافة بطاقة eSIM (Add eSIM) at the bottom of the screen.

6. Allow camera access

If asked for camera access, choose أثناء استخدام التطبيق (While using the app), then tap حسنًا (OK) on the note.

7. Wait for the network check

Wait a few seconds while the phone checks network info.

8. Start setup

If the الاتصال بشبكة الجوال (Connect to mobile network) screen appears, tap إعداد شريحة eSIM (Set up an eSIM).

9. Scan the QR code

Point the camera at the QR code from Jawroam. You can also choose إدخال رمز التفعيل (Enter activation code) to type it in.

10. Confirm setup

Tap إعداد (Set up) and stay on the screen until the download finishes.

The name shown is the plan's network name and may differ from Jawroam. This is normal.

11. Done

Tap إنهاء (Finish), then check on إعدادات SIM ٢ that the eSIM shows مشغّلة (Enabled). ✅


When You Arrive: Enable Data and Roaming

12. Set the eSIM for data

Go to الإعدادات → شبكة الجوال → إدارة بطاقتي SIM, and set بيانات الجوال الافتراضية (Default mobile data) to البطاقة الثانية (SIM 2).

13. Turn on data roaming

Go back to شبكة الجوال → بيانات الجوال (Mobile data). Under البطاقة 2 (SIM 2), turn on تجوال البيانات (Data roaming), then tap حسنًا (OK) to confirm.

On some newer phones, roaming appears as a list of options. Choose the one that includes international roaming, not domestic only.

🎉 You're all set!


Common Issues and Fixes

The eSIM is installed but data doesn't work abroad Check that بيانات الجوال الافتراضية (Default mobile data) is on البطاقة الثانية (SIM 2), تجوال البيانات (Data roaming) is on under SIM 2, and بيانات الجوال (Mobile data) is on.

Data connects, then drops Try selecting the network manually: