All guides

Install before you travel

How to Install eSIM on Huawei (Arabic Interface)

Very Important Notice ⚠️

Please read the eSIM installation instructions carefully before starting and follow the steps in order to avoid any installation issues. You can reinstall the eSIM on the same device only; it cannot be transferred to another device.

This guide is for Huawei phones set to Arabic. You'll install your eSIM by scanning the QR code from Jawroam, then enable data and roaming when you arrive. Each step shows the Arabic menu name you'll see, with the English meaning.

Note: Steps may vary slightly depending on your device and software version.


Before You Start

  • Check eSIM support: only a few Huawei models support eSIM, such as the P40, P40 Pro, Mate 40 Pro, and Pura 70 Pro. To check, look for an EID number in settings.
  • Quick Install isn't available on Huawei. Use the QR code instead.
  • Connect to Wi-Fi during installation.
  • Physical SIM in the SIM 2 slot? Your phone will ask you to disable it when adding the eSIM.

Install the eSIM

1. Open Settings

Open الإعدادات (Settings) and tap شبكة الجوال (Mobile network).

2. Open SIM management

Tap إدارة بطاقات SIM (SIM management).

3. Select SIM 2

Tap the SIM 2 card.

4. Choose eSIM

Select بطاقة eSIM (eSIM).

5. Add the eSIM

Tap إضافة بطاقة eSIM (Add eSIM) at the bottom of the screen.

6. Scan the QR code

Point the camera at the QR code from Jawroam.

💡 QR code on the same phone? Take a screenshot of it, then tap الاختيار من المعرض (Select from gallery) and choose the image.

7. Confirm

Tap إضافة بطاقة eSIM (Add this eSIM), and keep the screen open until installation finishes.

8. Check it's active

Check that the eSIM shows مشغّلة (Enabled) under SIM 2. ✅


Manual Entry (If Scanning Doesn't Work)

On the scan screen, choose إدخال يدويًا (Enter manually), then copy the two codes from the iPhone section of your Jawroam email:

  • SM-DP+ Address
  • Activation code

Huawei uses the same two-field format as iPhone, not the Android format.


When You Arrive: Enable Data and Roaming

9. Set the eSIM for data

Go to الإعدادات → شبكة الجوال → إدارة بطاقات SIM, and set بيانات الجوال الافتراضية (Default mobile data) to البطاقة الثانية (SIM 2).

10. Turn on data roaming

Go back to شبكة الجوال → بيانات الجوال (Mobile data). Under البطاقة 2 (SIM 2), turn on تجوال البيانات (Data roaming), then tap حسنًا (OK) to confirm.

🎉 You're all set!


Common Issues and Fixes

The eSIM is installed but data doesn't work abroad Check that بيانات الجوال الافتراضية (Default mobile data) is on البطاقة الثانية (SIM 2), and that تجوال البيانات (Data roaming) and بيانات الجوال (Mobile data) are on.

Data doesn't work after enabling roaming Try selecting the network manually: شبكة الجوال → بيانات الجوال → شركة الاتصالات (Carrier) under SIM 2.

I can't find Add eSIM Your phone most likely doesn't support eSIM. Check for an EID number in settings.


Need Help?

Jawroam support is on WhatsApp for any question before or during your trip.

🌍 eSIM plans for your trip: jawroam.com